Stationary press SP380 MAX

 

sp380max-1This stationary press SP 380 MAX is designed particularly for pressing cardboard, paper, and plastic materials.

The press is designed on the basis of SP 380 press with extended  length particularly in the press operating area, which enables  to press  larger waste. SP 380 enables pressing up  to  1.4 x 1.9 m, whilst SP 380 MAX enables pressing of waste up to 2 x 1.9 m. The pressing area width cannot be extended.


Comparison of both presses
SP 380 SP 380 MAX
Volume of one press cycle: 1,5 m3 2 m3
Total press volume: 2,9 m3 4,8 m3
Press slide dimensions: 1,96 x 0,6m 1,9 x 0,6 m

 

The body of press has reinforced floor from Hardox.  

The  hopper  volume  with  an  elevated  hopper  can  be  up  to  7m3.  The  standard  hopper dimensions are:  2.1 x 2.2 x 1.2 m.   

During one pressing cycle, the slide can press up to 2 m3 of material into the container; the pressing area dimension in front of the slide is 1.7 m x 1.9m.  

The  stationary  press  SP380MAX  can  apply  pressing  force  38  tonnes. Whilst  applying  such pressure, 5 to 6 tonnes of hard cardboard can be pressed in the additional container of 30m3 volume.


The pressing cycle is reduced to 35 sec. Standard motor is 7.5 kW.

The press can be delivered with a loader or a combination of the automatic opening of the lid with a loader.  The loader can be placed on the side (right or left) and thein the front of the machine.   

The press is produced in the automat version only. The press is connected to the container automatically by means of hydraulic hooks.  The connection enables the automatic opening of the container shifting  lid “guillotine”. Upon filling the container,  it  is automatically closed by means of the “guillotine” and disconnected from the press.  

The hydraulic unit is placed away from the closed area side enabling a good access for the machine maintenance.  Upon request, it can be placed independently on a platform.  

Stationary press SP 380MAX is assembler on a flat concrete base.   

The press  is controlled by means of buttons on the control panel. Upon customer  request, the  sound  and  optical  indication  of  the  press  operation,  the  container  fullness,  and  GSM module can be installed.

 

Containers ARK

With  the stationary press SP380 MAX we supply additional containers ARK with the volume 30 m3 only.
Containers have cone-shaped side walls. Default containers can be equipped with mechanical device “chain wall” which helps releasing the pressed material during emptying procedure.

Guiding lines (short or long ) are mounted in front of the press to help guide the container to the press.


sp380max-2 sp380max-3 sp380max-4thumb
sp380max-5 sp380max-6

Optional accessories:  

  • Hopper lid - steel
  • Aluminium lid cover
  • Automatic lid opening when the loader is used
  • Lid locking
  • High hopper or tubes, funnel
  • High sides
  • Optical sensor for the start-up
  • Rubber sealing of the door or the flap (partial or complete)
  • Flexible placement of hydraulic equipment
  • Stronger pump and engine
  • Oil cooling or heating
  • GSM module
  • Remote control from the platform
  • Two component paint
  • Safety handrail Víko násypky

sp380maxtechnEn