STATIONARY PRESS VSP 380
Stationary press VSP380 is firmly screwed onto a concrete base with anchor bolts. All functions of the container are controlled by buttons on the control panel and a programmable module.
STATIONARY PRESS VSP 380
Stationary press VSP380 is firmly screwed onto a concrete base with anchor bolts. All functions of the container are controlled by buttons on the control panel and a programmable module. The runways in front of the press allow seamless connection of an connection container to the press. In the event of unsuitable terrain (asphalt, interlocking pavers), the press can be placed on a steel floor.
This is the most popular press for operations that generate a regular amount of waste.
VSP 380 LH (automatic connection). This button is used for automatic connection through hydraulically controlled arms.
VSP 380 LR (manual connection). Once the container is pushed up against the press, the operator anchors the press hooks into the latches and fastens the container to the press with a ratchet screwdriver.
The button also opens the shield located on the secondary container and starts a pressing cycle lasting 50 seconds.
The number of cycles is set according to the customer’s requirements. When the container is 80% full, the light on the panel lights up. If requested by the customer, an audible alarm can also be installed. When the secondary container is 100% full, the red light on the panel lights up and the pressing stops. A GSM Module can also be installed on the press to signal faults and when the press is full, or it can be connected to the machine monitoring system.
Optional accessories for stationary press VSP 380
- hopper lid with gas struts
- aluminum lid cover
- lid lock
- optical startup sensors
- front, ramp or mobile loader
- hopper or tube as requested by the customer
- hopper or tube as requested by the customer
- connection to remote machine management
- tubes, roofs, door
- connection for conveyor systems
